| Description |
| |
|
Product Properties: |
| |
Operation of the product is simple ang convenient. |
| |
The product is small in volume,light in weight(total weight is about 50g including batteries)and convenient in carrying. |
| |
Power consumption of the product is low and the two originally-equipped two AAA batteries can be operated continuously for 30 hour. |
| |
Low voltage warning will be indicated in visual window when battery voltage is so low that normal operation the Oximeter might be inflluenced. |
| |
The product will automatically be powered off when no signal is in the product for more than 8 seconds. |
| |
Product Operation Scope : |
| |
The fingertip Oximeter can be used to measure human Hemoglobin Saturation and heat through finger.The product is suitable for use in family,hospital(including clinical use in internist/surgery,Anesthesia,pediatrics,intensive care and etc),Oxygen Bar,social medical organizations,physical care in sports(it can be used before or after sports.continually monitoring is not recommended). |
| |
|
Technical Parameters: |
| |
| Display Format: |
LED |
| SPO 2 : |
35-99% in two-digit 7-segment digital |
| Pulse Ratio: |
30-240 BPM in 3-digit 7-segment digital |
| Pulse Wave: |
6-segment bargraph |
| Battery Voltage Low Indication: |
LED signals |
| Power Requirements: |
Two AAA size 1.5v Alkali Battery |
| Power Consumption: |
Less than 40mA |
| Resolution: |
±1% for SP0 2 and ±1 BPM for Pulse Ratio |
| |
±2% in stage of 70%-99% SP0 2 and |
| Measurement Accuracy: |
meaningless when stage being smaller than 70%.±2 BPM for Pulse Ratio |
| Measurement Performance in Weak Filling Condition: |
Oxyhemoglobin and pulse value can be shown correctly when pulse-filling ratio is 0.5% |
| Interference Resistance Capacity against Ambient Light: |
Deviation is smaller thasn ±1% between value of Oxyhemoglobin measured in natural lighting indoor condition and present lighting sources and that measured in dark room |
| Automatically powered off: |
No finger is in the Oximeter more than 8 seconds. |
| Size: |
56x31x33mm |
|
| |
|
Handheld Pulse Oximeter Technical Specifications: |
| |
MMED is specially designed Handheld Pulse Oximeter with SpO2 wave display design for neonatal, pediatric and adult patients. Its compact design enable M0 come into wide use as clinical, homecare and ambulance. |
| |
| Patient Range |
Adult : |
Pediatric and Neonatal |
| |
Range : |
0%-100% |
| |
Resolution : |
1% |
| SpO2 |
|
70%-100%: ±2% |
| |
Accuracy : |
0%-69%:unspecified |
| |
|
|
| |
Method : |
Dual wavelength LED |
| |
Range : |
25-254 bpm |
| Heart (Pulse) Rate |
Resolution : |
1bpm |
| |
Accuracy : |
±2bpm or ±2% |
| Alarm |
Alarm : |
SpO2, probe off |
| |
Modes : |
Audio, visual, information |
| |
Type : |
Backlit LCD |
| Display |
Parameters : |
SpO2,PR,Pleth |
| |
|
waveform,Pleth bar |
| |
Information : |
SpO2 & PR trend, browse, |
| |
|
Low power, error, time |
| |
Operating |
|
| |
Temperature : |
0?-50? |
| Environmental |
Storage Temperature : |
-10? - 60? |
| |
Operating Humidity : |
15%RH - 95%RH |
| |
Storage Humidity : |
10%RH - 95%RH |
| |
|
Nternally powered equipment |
| Classification |
Type of protection : |
|
| |
Safety : |
IEC Standard 61601-1-1 |
| Storage |
Data records : |
Up to 1,440 |
| Michanical |
Size : |
150 x 94 x 47 mm |
| |
|
4 AA Alkaline batteries |
| |
Type : |
4 AA rechargeable |
| Battery |
|
batteries |
| |
Operation time : |
Approximately24 hours for normal |
| |
|
Operation |
|
